Design

EcoRays TP

The clear-cut design language of EcoRays TP is reflected in the choice of materials.
Glass – a fascinating material of natural constituents presenting a perfectly plane and immaculate surface.
Aluminum - a 100% recyclable ma-terial ideal for precise geometry creation.
With its puristic design and ex-cellent materiality of the stylish graphite finish, the EcoRays an exclusive aesthetic that is without equal.
Its generous, level surfaces offer the perfect options for combining with the new A2 arm line and the AEC finish sets.

ELECTRICAL

• Power supply: 110÷277V - 50/60Hz.
• LED current: 525/700mA.
• Power Factor: >0,9 (at full load - PLM)
• Power Factor: >0,95 (at full load - F, DA, DAC)
• Connection for cables featured by a maximum cross section of 4 sq.mm. (0.006 sq.")
• Optional fuse.
• Available dimming options:
DA: automatic dimming.
DAC: customizable DA profile.
PLM: power line communication light flux
adjustment.

RC: radio communication light flux
adjustment.

HOUSING

• Upper frame - Die Cast Aluminum
• Lower frame - Die Cast Aluminum
• Arm Fitter - Die Cast Aluminum (2 size options)
• Glass - Tempered 4mm th. (1/4" th) high transmittance.
• Latch - Extruded aluminium with stainless steel spring.

• IP Rating - IP66
• Tilt Angle - Post-top: 0°, +5°, +10°, +15°, +20° | Bracket: 0°, -5°, -10°, -15°, -20°

OPTICAL SYSTEM

• STU-M/S: Asymmetrical optic for street lighting (urban). (0F2H1)
• STE-M/S: Asymmetrical optic for street lighting (suburban). (0F3)
• STW: Asymmetrical optic for wide roads and wet asphalts lighting. (0F3)
• SV: Asymmetrical optic for narrow urban streets or highway entrance/exit turns. (0F2H1)
• Colour temperature: 4000K , (optional 3000K, 5700K) CRI ≥ 80 Photobiological safety class: EXEMPT GROUP
• CIE Photometrical classification: Semi cut-off
• IES Photometrical classification: Full cut-off
• IES Distribution: Type II / III / IV / V
• LED source efficiency: 138 lm/W @ 700mA, Tj=85°C – 4000K

SURGE PROTECTION

SURGE PROTECTION
Diff. Mode / Common Mode

modules
Class II
Class I

All Optics

1
10/7 kV
10/10 kV

2
10/10 kV
10/10 kV

3
10/10 kV
10/10 kV

4
10/6 kV
10/10 kV

Luminance Values / Optics

Luminaire Flux¹
(Ta=25ºC 4000K, lm)
modules	525mA	700mA
modules	S05 Optics
1	1730	2280
2	3470	4380
modules	STU-M / STU-S Optics
1	1660	2210
2	3220	4060
modules	SV Optics
1	1550	2040
2	3400	4280
modules	S Optics
2	3500	4420

Rated LED Flux²
(Tj=85ºC 4000K lm)
modules	525mA	700mA
modules	S05 Optics
1	1954	2637
2	4120	5274
modules	STU-M / STU-S Optics
1	1954	2637
2	4120	5274
modules	SV Optics
1	1954	2637
2	4120	5274
modules	S Optics
2	4120	5274

Rated Lumnaire Power¹
(Ta=25ºC, Vin-110VAC,W)³
modules	525ma	700mA
modules	S05 Optics
1	16	22.5
2	31.5	42
modules	STU-M / STU-S Optics
1	16	22.5
2	31.5	42
modules	SV Optics
1	16	22.5
2	31.5	42
modules	S Optics
2	31.5	42

Rated LED Power²
(Tj=85ºC, W)
modules	525ma	700mA
modules	S05 Optics
1	12	18
2	26	35
modules	STU-M / STU-S Optics
1	12	18
2	26	35
modules	SV Optics
1	12	18
2	26	35
modules	S Optics
2	26	35

The tables below describe the flux and output power of the available versions. These parameters
are necessary in order to guarantee a correct comparison of the luminaire performance.
In particular, the luminaire efficiency (expressed in lm/W) must be calculated as the ratio between
the output luminous flux of the luminaire and the power absorbed by the input power supply unit.
For the sake of completeness the tables also show the data of the nominal flux and power of the
used LED.

Luminaire Efficacy
(Ta=25ºC, 4000K, lm/W)
modules	525ma	700mA
modules	S05 Optics
1	108	101
2	110	104
modules	STU-M / STU-S Optics
1	104	98
2	102	97
modules	SV Optics
1	97	91
2	108	102
modules	S Optics
2	111	105

Note: The characteristics of the product listed above are subjected to change.
They will have to be confirmed in case of order.
Values indicated in this technical sheet are to be considered rated values subject to a tolerance of +/-5%.
Data listed above are subject to change without notice.
1: Rated data obtained in laboratory
2: Rated data extrapolated from LED manufacturer datasheet.
3: F and DA version at full load.

Rev. date: OCT-2017